Legal Metrology Delivery: standards calibration
Information on mass, length and volume calibration for local authorities.
Our service
Through its Legal Metrology Delivery (LMD) team, the Office for Product Safety and Standards (OPSS) provides a statutory calibration service under the Weights and Measures Act 1985 on behalf of the Secretary of State, checking the accuracy of the mass, length and volume standards held by local authorities.
Mass calibration
We can perform mass calibration to OIML R111. The accuracy of our comprehensive service is specified in the following table. We calibrate mass standards of up to 1 tonne – in stainless steel or other materials such as cast iron – to your own specification if required.
| Range of nominal mass | Uncertainty Class |
|---|---|
| 0.05 mg - 50 kg | Better than E1 |
| 0.05 mg - 50 kg | OIML Class E1 |
| 0.05 mg - 50 kg | OIML Class E2 |
| 0.05 mg - 250 kg | OIML Class F1 |
| 0.05 mg - 1000 kg | OIML Class E2 |
Length calibration
We can perform length calibration on benches equipped with laser interferometers and custom-built track and carriage systems. Flexible line standards of up to 50 metres can be calibrated with uncertainties of (10 + 0.6 L) micrometres, a level of accuracy amongst the best in the world. (Longer lengths can be measured using multiples of 50 metres.) Rigid line standards of up to 2.3 metres can be calibrated with uncertainties of (1 + 1 L) micrometres. We supply a wide range of length standards from a variety of manufacturers.
Volume calibration
We can perform gravimetric volume calibration (inferring volume from the weight of liquid discharged or contained) over a range of 1 ml to 20 litres for glassware and 1 litre to 500 litres for metal measures, with a best measurement capability of 0.008% of volume. For larger vessels we offer an on-site service. We can also calibrate volumetrically (using the transfer of liquid from a delivery vessel).
Contact LMD
For local authority enquiries please email [email protected].
For all other enquiries please email [email protected].
Write to:
Legal Metrology Delivery
Office for Product Safety and Standards
Stanton Avenue
Teddington
Middlesex
TW11 0JZ